Schluter Kerdi Shower Drain is a floor drain specifically designed to allow connections to Schluter Kerdi or other load-bearing, bonded waterproof membranes. The membrane is adhered to the large integrated bonding flange to form a waterproof connection at the top of the drain assembly. Schluter Kerdi Shower Drain consists of a drain casing and fully adjustable grate assembly or covering support to which tile is applied. The grate assembly accommodates a wide range of tile thicknesses and allows lateral and tilt adjustment as well. The covering support is placed flush with the top of the bonding flange and can therefore accommodate any thickness tile covering.
The standard Schluter Kerdi Shower Drain is attached directly to the waste line. The drain casing is available in ABS, PVC, or stainless steel. The plastic drain casings feature a fleece-covered bonding flange. They are available with standard 2" (50 mm) and 3" (75 mm) outlets and attached to the pipe using an appropriate solvent cement. The stainless steel drain casings are available with standard 2" (50 mm) and 3" (75 mm) no-hub outlets and are attached to the pipe using an appropriate mechanical no-hub coupling. The simple connection to standard drain outlets makes Schluter Kerdi Shower Drain suitable for new construction and renovation.